53-05 TCM-2800 Transmission Controller
The TCM-2800 can be configured to read engine sensors and transmit data on the CAN bus to other modules or dash displays. Most of these functions can be made right in the software. The TCM-2800 can control a GM 4L60E/65E/70E and a 4L80E/85E transmissions. The TCM-2800 will also allow the use of paddle shifters and ability to have Drive or Sport with a tap up or down shift as the OEM 6L80 has. This is not a plug and play setup. While it is straightforward, some wiring and plug termination will have to be performed along with programming. If you are not capable of programming but would like to install this controller, Zip can program the TCM-2800 for you. Please notify your salesperson at the time of the order is this needs to be done. The TCM-2800 comes complete with a programming cable and software, wiring harnesses are specific to transmission and purchased separately. *Note: If installing into a Corvette with a Carburetor, you will also need a TPS kit sold separately. OEM TCM will have to be calibrated as a 2010 Corvette in order to work with the TCM-2650
Generation | C1, C2, C3, C4, C5, C6 |
---|---|
Model Year | 1953, 1954, 1955, 1956, 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 |