Chat with us, powered by LiveChat
Loading...
69-72 350 w/Auto Direct Fit Aluminum Radiator & Fan Combo
Item #:
RA-282
By:
As low as $1,439.99
No Retail Discount

This item does not qualify for promotional or retail discounts.

Choose an Option for Stock Status
-
+
Related To This Item
The best of both worlds! This radiator and fan package includes our 1969-1972 350 w/AutoTransmission "Direct Fit" Corvette aluminum radiator and the SP460 dual electric SPAL fans.

Direct Fit radiators are completely manufactured and assembled right here in the United States. Along with that comes the quality that you would expect from a company that takes pride in turning out Corvette radiators. Each Direct Fit Corvette radiator begins life as an aluminum core with two 1" wide cooling tubes. This configuration more than doubles the cooling capacity by increasing the "tube to fin" contact area. This can only be achieved with an aluminum radiator since the aluminum material does not dramatically affect the radiators weight. Tanks are press formed and inlet/outlets are correctly configured for a drop-in installation. Each core is then brazed in a controlled atmosphere furnace; which eliminates the need for epoxy, ensuring leak free, trouble free service for many years to come. Direct Fit radiators include GM style top-hat channel and factory style tanks for a radiator that not only drops-in place but also looks OEM.

The dual fan addition to our Corvette Direct Fit aluminum radiator eliminates the factory Corvette fan shroud and engine driven fan. Increasing cooling efficiency while decreasing the "power rob" associated with engine driven cooling fans. All necessary relays, fuses, and wiring is included with the combo. As a bonus, the radiator includes the temperature switch pre-installed, so you don't have to. Made in USA.

Note: Due to front-end alignments and control arm clearance - the SPAL fan shroud may need to be adjusted on the radiator to complete installation. Adjustment is a simple process of relocating the electric fan kit on the aluminum radiator during installation.

Dewitt's has also solved the problem of ill fitting radiator cushions and support brackets. Direct Fit radiator can be installed with a newly designed rubber mount cushion that has been molded to fit both the GM "U" style radiator support bracket and the "top-hat" channel found on Direct Fit radiators. These cushions provide for a perfect mount - much better than stock rubber. To complete the installation of your Direct Fit radiator - Zip suggests purchasing (4) molded rubber cushions ( Zip # RA-240). Check out Zip # RA-240 for a picture of the molded cushion that fits the Direct Fit radiator like a glove!

Direct Fit radiators are available in your choice of natural or black ice coated. Black Ice is an OE-style epoxy finish designed to turn an aluminum radiator into a factory look-alike without affecting cooling performance. Specify radiator finish when ordering. Additional costs will be incurred for black ice coated.

Dual fan kits are designed to turn on at 195F based on the output of the temperature sensor. Some aftermarket air condition systems prefer the fans to be turned on when the air condition system is engaged. Forcing the fans to turn on in an effort to keep the air condition system functioning at its highest level. For air condition equipped Corvettes, if the desire is to turn the fans on when the air condition is engaged, an additional SPAL relay wiring harness kit must be purchased. See Zip # RA-351 to complete the installation for an air condition engaged dual fan system.

Dewitts Direct Fit aluminum radiators are warrantied to be free from defects in materials and workmanship for as long as you own the Corvette in which it was originally installed. This warranty is extended only to the first retail purchaser of any such radiator. Proof of purchase must be provided from an authorized dealer. If the radiator is used in any racing application this warranty is considered null and void. Radiators used without an adequate proportion of premium quality antifreeze coolant and distilled water are not covered by this warranty. DRI radiators require a correct proportion of quality coolant, which contains aluminum corrosion inhibitors in the formula and distilled water. All Corvette cooling systems must include a radiator pressure cap with the proper pressure rating. Distilled water and premium antifreeze must be used with all Corvette aluminum radiators!

Dewitt Item Number 32-4239070A, 32-4139070A, 4339070A, 4339070A-C

This item is proudly Made in the USA

Installation difficulty: 3

Our technicians have determined that the installation difficulty level of this item is a 3 on a scale of 1-5. Read more about our install ratings here.

Technical Articles:

Model Years

More Information
Generation C3
Model Year 1969, 1970, 1971, 1972
Additional Item Information

Dewitt

Based in Michigan, DeWitts Radiator is the only aftermarket radiator manufacturer in the US which owns an aluminum Nocolok blazing furnace. With a twelve-person crew, DeWitts builds custom and direct fit radiators for 1955-present Corvettes from start to finish at their Howell, MI plant. No epoxy is used in the making of their radiators, and their construction methods eliminate seams and possible leak points. Their Lifetime Warranty is industry leading, and Zip only recommends DeWitts Radiators to our customers.

Write Your Own Review
You're reviewing:69-72 350 w/Auto Direct Fit Aluminum Radiator & Fan Combo
Your Rating
Copyright © 2024, Zip Products Inc All rights reserved.