Zip Corvette sales and customer service representatives are here to serve you during the following hours:
(Eastern Standard Time)
Our showroom is open to the public Monday-Friday from 8:30am-5:30pm (EST). We take orders in our showroom or you may call your order in over the phone and we will prepare your items in advance so you do not have to wait.
Our performance and installation facility is open Monday-Friday from 8:30am-5:30pm (EST). Visit our showroom to setup an appointment to have your Corvette tuned, accessorized, enhanced or more. Read more about our performance and installation facility here. *All work requires an appointment.
The Lingenfelter supercharger pulley upgrade kit is designed to enhance the ZR1 LS9 Corvette supercharged engine. This upgrade kit produces excellent horsepower and torque improvements over the factory 638 horsepower and 604 lbs ft of torque while maintaining a safe level of boost and supercharger RPM. Testing at Lingenfelter has shown 680 BHP and 660 lbs ft of torque with the Lingenfelter pulley upgrade kit installed. Installation of the kit does not require ECM programming or serpentine belt changes and will overdrive the supercharger 19% to raise boost on a stock engine 3-4 psi.
Parts included in kit:
2.60 inch diameter steel supercharger drive pulley powder coated black - 11 rib
Installation kit with everything you need to do the installation
Note: This pulley requires advanced installation techniques including removal of factory supercharger, pressing off old pulley, and pressing/pining new pulley onto shaft. No Discount.
This item is proudly Made in the USA
Installation difficulty: 5
Our technicians have determined that the installation difficulty level of this item is a 5 on a scale of 1-5. Read more about our install ratings here.
Almost no effort. Either snap on or plug and play. Probably no tools involved.
Simple installation with common tools. Probably less than 20 minutes for installation. Easy enough for
anyone who can read and follow instructions. A good first project for someone with no experience. Hard
to mess up.
A little mechanical experience is helpful but not necessary. Possibly a good first project for those with
a little more confidence. Will probably take more time (20-60 minutes) than #2.
Mechanical experience a definite plus. Not a good first project for the inexperienced. Most likely a 2-3
hour job minimum.
Only for the experienced wrench. Most likely requires good tool collection, possibly special tools and
a fair amount of experience. 95% of people will choose to have this installed by Zip or a professional.