Chat with us, powered by LiveChat
Loading...
14-19 LT1 aFe Cold Air Intake System (Pro 5R Media)
Rating:
100% of 100
Item #:
PM-769
By:
aFe
$504.99
In Stock - Ships today if ordered by 3:00 PM ET
-
+
Related To This Item

aFe is proud to introduce the all new Momentum sealed intake system for the 2014-2019 LT1 Corvette Stingray. This all new Momentum intake system resulted in 18 horsepower and 22 ft/lbs torque while outflowing the factory intake system by 42%. Superior in every way, from the one-piece sealed housing, to the massive air filter, roto-molded tube w/ built-in resonance chamber and premium hardware. This system uses a CAD designed, dyno-tuned, roto-molded intake tube & housing to achieve maximum power gains while maintaining a perfect fit. This is a direct bolt-on kit and requires no cutting or drilling on OEM parts.

Unique One-Piece Housing w/ Sight Window: The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract.

Roto-Molded Tube:
CAD designed, dyno-tuned, roto-molded intake tube will achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Two billet aluminum fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines.

Massive Cone Air Filter:
This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 9-1/2" tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles.

Premium Hardware:
Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

Proven Results:
After a rigorous design and testing phase, the results are in. The Momentum air intake system outflowed the factory intake by 42% and resulted in 18 additional horsepower and 22 lbs. x ft. torque.

Pro 5R vs. Pro Dry S Air Filter: What's the difference between aFe's Pro 5R and Pro DRY S air filter?

Pro 5R media's primary benefit is PERFORMANCE. Designed to provide the largest amount of high-flowing cold air for the greatest horsepower and torque potential. 98.6% filtration efficiency. Washable and reusable cotton composite media that is designed to be cleaned and oiled.

Pro DRY S media's primary benefit is CONVENIENCE. Oil-free 3-layer synthetic filtration media is an easiest to service performance air filter. 99.2% filtration efficiency. Washable and reusable without oiling.

Note:This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

aFe Item Number 54-74201

This item is proudly Made in the USA

Product Downloads

Installation difficulty: 3

Our technicians have determined that the installation difficulty level of this item is a 3 on a scale of 1-5. Read more about our install ratings here.

Model Years

More Information
Generation C7
Model Year 2014, 2015, 2016, 2017, 2018, 2019
Additional Item Information
  • UPC: 802959540916
  • Manufacturer Part Number: 54-74201
  • P65 Warning WARNING: Cancer and Reproductive Harm - www.p65warnings.co.gov
  • CARB Certification: This item is not CARB exempt and is not Legal to purchase in California

aFe

Advanced FLOW Engineering (aFe) is all about moving air through your engine as effectively as possible. From Jeeps to Corvettes, aFe develops more than just cold air intakes and air filters. Their 160,000 square feet of facilities in Southern California house their corporate headquarters, manufacturing facility, R&D lab, and warehouse. Their complete product line includes: fluid filters, intake manifolds, turbochargers, exhaust, programming systems, and throttle body spacers. Zip uses aFe products because we believe their products are among the best available for the Chevrolet Corvette.

Write Your Own Review
You're reviewing:14-19 LT1 aFe Cold Air Intake System (Pro 5R Media)
Your Rating
Copyright © 2024, Zip Products Inc All rights reserved.