20-23 E60 LPE Front Lowering Spacer Kit

The LPE C8 Corvette Front Lowering Kit is a replacement for the stock front lift actuator seat to give customers the ability to lower the front of their 2020-2023 Corvette equipped with optional E60 front lift. The front lift lowering spacer kit is engineered to give the maximum 0.75 inch drop to retain the OEM?s design and load tolerances of the front lift system. The front lowering kit also comes with a 0.25 inch spacer to drop the car 0.50 inches for track tuning without the need of an all new machined actuator seat. A de-pinning tool is provided to remove the pins from the shock electrical connector on cars equipped with magnetic ride.

Front lowering kit spacer is precision machined to achieve very tight tolerances for a precise fit over the shock body. Therefore the kit doesn?t hinder the stock shock or spring performance and the Corvette will have the factory ride but with a more aggressive and performance oriented stance.

Use the LPE C8 Corvette E60 front lowering kit with the LPE Spanner Wrenches (Zip # TL-183) to adjust the rear of the car to get the performance and stance you desire all the way around.

C8 Corvette Front Lowering Kit features:

• Precision Machined out of 6061 Aluminum
• Critical Tolerances are Machined to +/- 0.0005 inches
• Provides the Maximum Amount of Drop at 0.75 inches
• Includes 0.25 inch Spacer for adjusting to 0.50 inch Drop
• Includes De-Pinning Tool for Shock Electrical Connector
• Designed, Engineered and Made in USA