06-12 Z06 + ZR1 Magnaflow Exhaust System Quad Tips *Discontinued*
Item #:
326091
$0.00
Flat Rate Shipping $99.95
Due to the size, weight and/or dimensions of this item it will be delivered by our truck freight carrier. All truck freight shipments are required to be prepaid for the total parts cost plus freight charges by check, money order or credit card. The customer is responsible for being at the provided shipping address to accept delivery.
Temporarily Discontinued
This item is discontinued.
Z06 and ZR1
MagnaFlow Performance Exhaust has developed a complete performance cat-back exhaust system to further increase performance of the new 7.0L Corvette Z06. This all-stainless steel dual 3" exhaust was designed to reduce backpressure andfree up all available horsepower from the factory 7.0L V8, while also reducing weight. The stock exhaust was built with a bypass system which forces the 427ci motor to breathe through 2" outlets under 3,000 rpm. MagnaFlow's system is 3" mandrel-benttubing from inlet to tip with superior-flowing mufflers, allowing the car to see an additional 15hp and 18 lb-ft, below 3,000 rpm, and an additional 10hp and 11 lb-ft above 3,000 rpm. Twelve pounds lighter than the stock system, each MagnaFlow cat-back begins with the 3" Tru-X, flowing through dual mandrel-bent pipes into twin 5" x 8" oval polished straight-through mufflers and exiting through two 4" round polished stainless steel double-wall tips. MagnaFlow stainless steel exhaust components include a lifetime warrenty
Z06 and ZR1
MagnaFlow Performance Exhaust has developed a complete performance cat-back exhaust system to further increase performance of the new 7.0L Corvette Z06. This all-stainless steel dual 3" exhaust was designed to reduce backpressure andfree up all available horsepower from the factory 7.0L V8, while also reducing weight. The stock exhaust was built with a bypass system which forces the 427ci motor to breathe through 2" outlets under 3,000 rpm. MagnaFlow's system is 3" mandrel-benttubing from inlet to tip with superior-flowing mufflers, allowing the car to see an additional 15hp and 18 lb-ft, below 3,000 rpm, and an additional 10hp and 11 lb-ft above 3,000 rpm. Twelve pounds lighter than the stock system, each MagnaFlow cat-back begins with the 3" Tru-X, flowing through dual mandrel-bent pipes into twin 5" x 8" oval polished straight-through mufflers and exiting through two 4" round polished stainless steel double-wall tips. MagnaFlow stainless steel exhaust components include a lifetime warrenty
| Model Year | 2006, 2007, 2008, 2009, 2010, 2011, 2012 |
|---|---|
| Base Unit of Measure | SET |
| Search Description | 16495 STAINLESS STEEL EXHAUST MUFFLERS SYSTEM |
| Net Weight | 71.000000 |
Additional Item Information
Write Your Own Review