06-13 Z06/GS ACS ZR1 Front Splitter
Item #:
F-741
As low as $379.99
Additional Shipping Charges: $11.50

This item requires a Oversize Fee of $11.50 that will be added to the shipping amount during checkout.

Choose an Option for Stock Status
-
+
At the 200 mph mark the factory ZR1 Corvette required additional downforce to keep the nose planted. GM's solution was a front splitter that was designed to control airflow while adding extreme looks to the front end. ACS's high quality RTM replica Corvette front splitter will bolt directly to any factory C6 Z06, ZR1 or Grand Sport Corvette.

Advanced Composites' ZR1 Corvette front splitter is manufactured using RTM (Resin Transfer Molding) technology, which creates an OEM quality Corvette part. Fiberglass is injected into a mold and then compressed under high pressure. This manufacturing method creates a panel that is smooth on both sides with a consistent thickness across the entire surface. The controlled fiberglass/resin composition of RTM, reduces cure times and eliminates the possibility of "wet" parts being removed from the mold prematurely. All of which is impossible with the standard hand laid process. Panels are then trimmed using a CNC robotic water jet for a clean, smooth cut on every part. The result is better fitting panel, reducing body shop installation and fitment times.

Due to an increase in downforce, Zip recommends installing the ZR1 Corvette front bumper reinforcement to keep the front bumper from becoming distorted at high speeds. Factory ZR1 Corvettes utilized this reinforcement - see Zip # BU-501 for ordering information.

2006-2013 ZR1 front splitters are available in primer, painted satin black or painted in Carbon Flash - specify color when ordering.

Installation difficulty: 3

Our technicians have determined that the installation difficulty level of this item is a 3 on a scale of 1-5. Read more about our install ratings here.

Model Years

More Information
Model Year 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013

Advanced Composite

ACS (Advanced Composite Specialties) is an OEM validated composite manufacturer that specializes in RTM and Carbon Fiber body panels. ACS uses a mix of technology and personalized care to ensure your product is the most cost-effective it can be. In an industry where cost and quality are constantly jockeying for position, ACS uses its extensive knowledge and experience to offer the best composites for your Corvette. We like ACS products so much, we even installed their equipment on our C7 Stingray!

Write Your Own Review
You're reviewing:06-13 Z06/GS ACS ZR1 Front Splitter
Your Rating
Copyright © 2019, Zip Products Inc All rights reserved.