65-74 Valve Covers - Big Block - Cast - Polished (ND)
Item #:
302291
$929.15
No Discount
This item does not qualify for promotional discounts or wholesale pricing.
Dropship - This item ships direct from the manufacturer and is not eligible for express shipping.
*Strong sand-cast aluminum construction
*160" thick wall
*Precision-machined gasket flange to provide uniform clamping force on the gasket-much less prone to leak than stock covers which are typically made of .035" stamped steel
*Available in several finishes: as-cast aluminum, orange powder coated, or high gloss polish
*General Motors Trademarks are used under license to PML Inc.
*Raised CORVETTE script and fins. Stock height, perimeter mount, and PCV & breather holes. Cast-in internal oil drips. Left side brake booster relief.
Note:
There may not be clearance for the Power Brake Booster. / Does not use an oil fill cap. You will have to fill oil through the PCV hole.
NOTE: These are sand cast parts and there will be some porosity.
*160" thick wall
*Precision-machined gasket flange to provide uniform clamping force on the gasket-much less prone to leak than stock covers which are typically made of .035" stamped steel
*Available in several finishes: as-cast aluminum, orange powder coated, or high gloss polish
*General Motors Trademarks are used under license to PML Inc.
*Raised CORVETTE script and fins. Stock height, perimeter mount, and PCV & breather holes. Cast-in internal oil drips. Left side brake booster relief.
Note:
There may not be clearance for the Power Brake Booster. / Does not use an oil fill cap. You will have to fill oil through the PCV hole.
NOTE: These are sand cast parts and there will be some porosity.
| Model Year | 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 |
|---|---|
| Base Unit of Measure | PR |
| Search Description | CORVETTE 396 427 454 ENGINE VALVE ROCKERS COVERS |
| Net Weight | 6.000000 |
Additional Item Information
Write Your Own Review