79-82 Power Antenna - Without CB - 1979 Late

Plug & Play for all 1979-1982 electric antenna applications

Correct Harness

Mast has correct finial, protective boot and appears "OE"

Motor assembly uses modern components and works correctly with low amp draw

Comes withdetailed instructions

C3 Power antennas are designed to work with factory radios using the original harness and relay. If you use an aftermarket radio and attempt to bypass the original relay, the antenna will not work and we do not have any warranty if thewires have been cut and spliced to achieve operation.
The original relay is a reversing unit that reverses polarity causing the antenna to go up and down. If an aftermarket radio is used, it must be integrated to use the original relay for properoperation.

DO NOT ATTEMPT TO BENCH TEST. You can connect it to the cars original wiring harness with the factory relay and factory radio to test itonly making sure both fuses are good. See service manual for proper operation and troubleshooting.