Zip's polyurethane cushions were custom designed for your C6 Corvette's suspension. The top surface is NOT flat like factory rubber bushing. Flat polyurethane bushings will bind as the suspension actuates causing the bushing to tear - Zip's bushings are designed with a convex radius that allows the bushing to slide as the control arms pivot. Our bushings are also designed to snap over the spring bolt rather than being permanently attached - this design keeps the bushing from breaking away from the adjustment bolt as the suspension pivots.
Zip's lowering kit will allow you to drop your C6 Corvette approximately 2" and you can keep your factory bolts in case you want to restore your Corvette's ride height later. Proudly manufactured in the USA. Requires disassembly of suspension for installation.
When lowering your Corvette often times the ride become harsh because the factory shocks were not designed for the lower stance. Zip recommends converting to a QA1 shock, which has a shorter shock body allowing the Corvette to ride within the dampening of the shock absorber. Plus, QA1 shocks allow for adjustable dampening with either single or double adjustable valve body.
|Model Year||2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013|