65-82 Brake Caliper Rebuilt Overhaul Kit - Stainless Steel Sleeved With O-rings
Item #:
192307
$743.70
Core Charges: $320.00
This item requires $320.00 of core charges. Customers who have purchased a product sold on an exchange basis and had a core deposit applied must return the required rebuildable core within 30 days from the date of shipment. A copy of the original invoice must accompany the return. Failure to return cores within 30 days may result in a reduction or loss of the core deposit. Return freight for cores is the responsibility of the customer.
Available On Backorder - This item is estimated to ship on November 14
* Using DOT 5 brake fluid will void warranty
Why go with O-Rings?
Lip seal design seals are used on 1965-1982 Corvette calipers. Lip seals have inherent problems. When they sit for a period of time they leak brake fluid. When they are used on a Corvette with out of spec / warped rotors , spindles, loose bearings or that is driven hard; they can actually suck air into the caliper fluid area causing a loss of brake pedal. This problem is called (by GM engineers) reverse airoscillation. Because of these problems, GM quit using lip seals in the 1982. O-Ring seals virtually eliminate all of these lip seal problems. If GM doesn't use lip seals anymore, why are you?
Calipers are still sleeved with a stainless steel sleeve and completely remanufactured using all new parts but instead of using the lip seal that come from GM these calipers utilize the O ring seals. Each one is pressured tested and stamped to insure quality and comes with a limited lifetime warranty.
Core Charge of $320.00
Why go with O-Rings?
Lip seal design seals are used on 1965-1982 Corvette calipers. Lip seals have inherent problems. When they sit for a period of time they leak brake fluid. When they are used on a Corvette with out of spec / warped rotors , spindles, loose bearings or that is driven hard; they can actually suck air into the caliper fluid area causing a loss of brake pedal. This problem is called (by GM engineers) reverse airoscillation. Because of these problems, GM quit using lip seals in the 1982. O-Ring seals virtually eliminate all of these lip seal problems. If GM doesn't use lip seals anymore, why are you?
Calipers are still sleeved with a stainless steel sleeve and completely remanufactured using all new parts but instead of using the lip seal that come from GM these calipers utilize the O ring seals. Each one is pressured tested and stamped to insure quality and comes with a limited lifetime warranty.
Core Charge of $320.00
| Model Year | 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982 |
|---|---|
| Base Unit of Measure | SET |
| Search Description | BRAKES CALIPERS KIT SET |
| Net Weight | 61.000000 |
Additional Item Information
Write Your Own Review