58-74 Electronic Ignition Kit - Pertronix II High Performance - 283 / 327 / 350
* The Ignitor II is not damaged if the ignition switch is left in the "ON" position when the engine is not running
* The Ignitor II can use low-resistance performance coils: 0.45-3.0 DC ohms (most coils are OK but not HEI Coils or E-Core Square Coils)
* The Ignitor II increases dwell at higher RPM to produce a better spark (but this dwell change doesn't affect timing)
* The Ignitor II used the magnet ring and therefore can require distributor removal if shims need to be added above the drive gear
* The Ignitor II draws more current than a stock ignition system. Bypassing the resistor or resistance wire isgenerally recommended (can require some rewiring)
Includes:
271090 Pertronix Ignitor II
301161 SB Flame Thrower Spark Plug Wires
301241 Chrome Flame Thrower II Chrome Coil
| Model Year | 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974 |
|---|---|
| Base Unit of Measure | SET |
| Search Description | DISTRIBUTORS IGNITION COILS 301221 |
| Net Weight | 3.640000 |






















