97-13 Seat Bottom Cushion Repair Kit

Factory C5 & C6 Corvette seats side bolsters do not have support under them. As you climb in/out of the seat, the outside bolster seat foam tears where it contacts the steel seat frame and quickly goes flat. In addition, the steel support wires in the center area cut into the foam and cause the seat to sag and pinch around the hip area. The leather looks baggy and deep wrinkles soon appear.

These seat repair kit corrects the seat design defect where there is no support under the side bolsters and the center wires. Kits includes the necessary materials cut to the right size and shape plus detailed, step-by-step instructions with photos. 

Included in the kit is the material for 1 seat:

• High density industrial-grade foam as highlighted below.
• Tough, wear resistant Ballistic nylon fabric to repair the cut foam.
• .25 inch jute pad to make the seat firmer
• Zip ties to replace the metal hog rings.
• Detail step-by-step instructions with photos
• NO special tools are required.

Note: Spray adehsive is NOT included. We recommend using 3M Super #77 or #90 or equivalent.