This item does not qualify for promotional or retail discounts.
The new Detroit Speed C2/C3 SPEEDRAY front suspension has no compromises and exclusive suspension geometry for superior handling and ride quality. Available as a 100% bolt-on system or with a small amount of fabrication for a competition coilover option that allows faster spring changes.
The SPEEDRAY system features Detroit Tuned quick ratio power rack and pinion steering along with forged in the USA Detroit Speed aluminum uprights. The bolt-on powder coated cradle assembly improves suspension geometry, provides rigid mounting for the rack and pinion, and includes integrated tie down eyelets. DSE/JRi "Detroit Tuned" Coilover shocks/springs allow for spring rate tuning and ride height adjustment. It also includes a splined sway bar with aluminum arms, composite bushings, powder coated tubular upper and lower control arms with Delrin bushings, forged offset upper control arm mounting brackets with caster tuner bushings to optimize suspension geometry while providing clearance for Gen V LT4 engines. The kit also includes Torrington bearings and a spanner tool for easy spring height adjustments.
This SPEEDRAY kit is designed for 1963-1982 Small Block or LS Corvettes. Fabricated system requires cutting upper shock tower and welding upper coilover mount bracket (see instructions). Kit features non-adjustable shock and 550lb coil-over springs.
The DSE/JRi Detroit Tuned base shock is a pure blood pedigree racing shock in its most efficient form as a non-adjustable unit. Although non-adjustable, it shares all the increased dynamic responses of all the JRi adjustable models while providing excellent ride quality on the street.
- Total Suspension Travel = 6?
- Ride Height* = 7.6? ±1.0?
- Static Camber = -0.5° ±.2°
- Static Caster = 7.5° ±.5°
- Static Toe = 0° ±.1°
- Steering Ratio = 13:1
- Steering Wheel Turns Lock to Lock = 2
- Max Turning Angle (Outside wheel) = 27.5°
- Ackerman Angle (Full turn) = 5.2
- Total Bump Steer (20? toe span) = .039"
*Measured from bottom of DSE front cradle to center of hub.
Note: The body and engine do not need to be removed for installation of the SPEEDRAY front suspension.
|Model Year||1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, 1981, 1982|